- No products in the cart.
-
-
-
specifications: [[item.skuinfo]]
price: [[item.currency]][[item.price]]
[[item.currency]][[item.allPrice]]
-
-
Price
This store has earned the following certifications.
- Certified Secure Certified
- 100% Issue-Free Certified
- Verified Business Certified
- Data Protection Certified
Shop / woodpeckers miter gauge
Fulton Precision Miter Gauge with Aluminum Fence and 45° Ends for Enhanced Stock Support and Flip Stop
About this item
- Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
- The solid aluminum head, which is 0.200 inches thick, is adjustable and machined with 13 holes for positive stops. One hole is at 90 degrees, with 6 holes on each side at 22.5, 30, 45, 60, 67.5, and 90 degrees. The positive stops cater to various woodworking projects. To change the angle, loosen the post knob handle, pull out the spring-loaded indexing pin, rotate the head, release the pin, and lock it back into position.
- Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
- The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
- The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
GUARANTEED SAFE CHECKOUT
24 Hours Cancellation
We accept order cancellation before Within 24 hours the product is shipped. If the order is cancelled you will get a full refund.
30 Days Returns & Exchanges Policy
If for any reason you are not satisfied with the purchased item,You have 30 days after delivery of your order to return an item.
After 30 days of delivery of your order, we will no longer accept returns.
Refund Process & Return conditions:
To request a return,please email us at:[email protected] ,We will respond within 24 hours after
the consumer sends the email (except weekends).
If it is a quality issue, please
provide an order number and attach clear photos of the items that represent the
issue.
After we receive the returned order, our Quality Assurance department will
inspect and verify the condition of the item.Upon acceptance of your return, a refund
will be issued to the original form of payment within 1-3 business days.
Make sure your item meets all our return conditions :
Items returned without authorization will not be accepted.
The time frame for return
must not exceed 30 days from when the original order was received.
Any promotional
gifts must also be returned with your returned item.
All items must be returned in
their original condition, without scratches or signs of wear, and must not be resized or
altered in any way.
Your return needs to be sent within the given time frame(3-12
working days)
Please make sure you provide us the tracking# and receipt after you
return.
Refunds
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, we will credit the credit limit to your credit card or original payment method within 5 business days (bank processing time frame).
MORE FROM woodpeckers miter gauge
MORE FROM recommendation
